Robotbase MCP

List every chain on the RobotBase roster with its state. When to use: the user asks which chains are supported, which nodes are online, or where to start. Do not use: for one chain's live health call chain_status; for what a node can and cannot answer call robotbase_capabilities. Returns: chains[], each {chain, tier (live|provisioning|planned), ok, synced, height, state}.

Live run-time state of one chain's node. When to use: is this chain's node synced, healthy or lagging; what is its height, peer count, mempool depth or client version. Do not use: fees (that is btc_get_fee_rates); a specific payment (that is btc_get_transaction); ZEC pool distribution (that is zec_get_pool_status). Returns: chain, ok, synced, height, peers, mempool, client, state; a chain that is

Per-chain capability, retention boundary and fee model. When to use: before promising that some query is possible, or when a tool refused a query as out of range. Do not use: for live numbers (that is chain_status). Returns: one row per chain {chain, tier, name, client, state, capability}, plus the fee models we support and an honesty note. Key fact: RobotBase publishes no RPC endpoint - every rea

Zcash chain state plus the distribution of all six value pools, in one call. When to use: how much ZEC sits in each shielded pool, the shielded share of supply, and whether the ZEC node is caught up. Do not use: we do not index Zcash transactions or wallets; for node peers and disk usage call chain_status. Returns: blocks/headers/estimated_height/chain_supply/difficulty/size_on_disk_gb, node_value

The most recent Zcash blocks. When to use: checking whether ZEC is producing blocks normally and at what interval. Do not use: for shielded-pool supply (that is zec_get_pool_status). Returns: for the last N blocks (default 5, max 20): height, hash, time, difficulty.

Bitcoin fee rates for confirmation targets, plus the mempool floor. When to use: pricing a Bitcoin transaction, or deciding when a sweep will confirm cheaply. Do not use: to measure backlog depth (that is btc_get_mempool_state). There is no equivalent for Zcash: ZEC fees are protocol-fixed, see robotbase_capabilities. Returns: estimates for 1/2/3/6/12/24-block targets in BTC/kvB, recommended.fast_

Bitcoin mempool depth, capacity load and a busy/normal verdict. When to use: deciding whether now is a good moment to settle on-chain, or how large the backlog is. Do not use: to choose a fee (that is btc_get_fee_rates). Returns: txs, bytes, usage_mb, max_mempool_mb, load_pct, min_fee_btc_kvb, total_fees_btc, verdict.

Look up one Bitcoin transaction by txid - the core settlement check. When to use: has this payment arrived, which block is it in, how many confirmations does it have. Do not use: for a whole block (that is btc_get_block); for an address balance (that is btc_get_address). Returns: txid, blockhash, confirmations, time, size/vsize, vin_count, up to 12 outputs with address and value, value_out_btc.

Bitcoin block summary by height or hash; omit both for the chain tip. When to use: an overview of a block, or confirming which block a payment landed in. Do not use: to fetch a single payment (that is btc_get_transaction). Returns: hash, height, time, txs, size, weight, confirmations, previousblockhash.

Balance and activity of a Bitcoin address, with no key involved. When to use: reconciling a merchant wallet, or checking whether an address received funds and how active it is. Do not use: we do not label or risk-score addresses; for a single payment use btc_get_transaction. Returns: address, confirmed/unconfirmed balance, utxo count and total, tx count, last 10 transactions. Supports P2PKH (1..),

Monero node state: height vs target, sync flag, difficulty, txpool size, database size, monerod version and peer counts. When to use: whether the XMR node is synced and healthy, or how big its chain and txpool are. Do not use: for fees call xmr_get_fee_rates; for one transaction call xmr_get_transaction; for network-wide numbers call xmr_get_network_stats. RobotBase does not index Monero wallets o

Monero fee estimate per kB, split into ascending priority tiers, read from our own monerod. When to use: pricing an XMR transaction, or deciding whether to pay the baseline fee to land in the next block. Do not use: for Bitcoin fees (btc_get_fee_rates) or for mempool depth (xmr_get_mempool_state). Returns: baseline_fee_per_kb_xmr plus priority_tiers[] each with {priority, fee_per_kb_atomic, fee_pe

Monero mempool: pending transaction count, total bytes and fees, age of the oldest pending tx, double-spend/failing counts. When to use: is the network quiet or piling up, and roughly how long a new transaction waits. Do not use: for fees (xmr_get_fee_rates) or for a specific payment (xmr_get_transaction). Returns: pending_txs, bytes_total, fee_total_xmr, oldest_pending_age_s, double_spends, faili

One Monero block header, by height or by block hash. When to use: confirming which block a transaction landed in, or inspecting reward, difficulty and weight of a block. Do not use: to list recent blocks (xmr_get_recent_blocks) or to look up a transaction (xmr_get_transaction). Returns: height, hash, prev_hash, timestamp, age_s, tx_count, reward_xmr, difficulty, block_weight, block_size_bytes, maj

The most recent Monero blocks with the observed block interval. When to use: checking that XMR is producing blocks normally and at roughly the 120s target. Do not use: for one specific block (xmr_get_block). Returns: tip_height, avg_block_interval_s, target_interval_s, blocks[] {height, hash, timestamp, tx_count, reward_xmr, difficulty, weight}.

Look up one Monero transaction by txid: is it mined, in which block, how many confirmations, its size, output count and ring size. When to use: did this XMR transfer get into a block, and how deep is it now. Do not use: to learn the amount or the sender/recipient - Monero hides those by design and no third party can recover them; only the recipient (or a holder of the tx key) can prove a payment.

Monero network-wide state: network hashrate, difficulty, emission and fees over the last 720 blocks, protocol version and the next hard fork. When to use: macro questions about the Monero network - how much hashrate secures it, what is being issued, and which protocol version is active. Do not use: for our node's own health (xmr_get_node_status). Returns: height, network_hashrate_hs, difficulty, b

Verify one Monero payment cryptographically, using proof material only the recipient can provide. Give it a txid plus either the transaction key (from your own wallet: get_tx_key <txid>) or a transaction proof signature (get_tx_proof), and it returns whether that transaction really pays the given address, for how much, and how many confirmations. When to use: a merchant or agent needs to confirm a

Bitcoin network and node state: difficulty, network hashrate, total transactions processed and the current tx/s rate, protocol version, peer connections, relay fee, mempool size, uptime and which indexes (txindex) are synced on our node. When to use: macro questions about Bitcoin - how much hashrate secures it, how fast the chain is moving, or whether our node's indexes are complete. Do not use: f

One Ethereum block by number, tag (latest/finalized/safe) or hash: timestamp, transaction count, gas used against the limit, base fee, block builder and size. When to use: block-level context - how full is Ethereum right now, when a block was produced, what the base fee was, or which builder produced it. Do not use: for a transaction (eth_get_transaction) or for fees across blocks (eth_get_fee_rat

Ethereum event logs over a block range, optionally filtered by contract address and event signature, with ERC-20 Transfer logs decoded (token, from, to, amount). When to use: find transfers or contract events in a window - 'who moved this token in the last N blocks', or watch a contract's activity without an indexer. Do not use: for a single transaction (eth_get_transaction) or to scan huge ranges

Monero output distribution: how many spendable outputs fall into each ring-size bucket, read from our own monerod. This is the anonymity-set side of Monero that free explorers rarely expose. When to use: reasoning about Monero privacy - how large the spendable-output set is at a given height. Do not use: to guess a 'privacy score' (we return raw counts only). Boundary: monerod's distribution data

Zcash shielded commitment-tree state: the Sapling, Orchard and Ironwood anchor roots at a given block. When to use: shielded-pool depth - how the shielded sets advance over time, or the anchor a wallet or prover needs to recognise. Do not use: for pool supplies (zec_get_pool_status) or a transaction (zec_get_transaction). Returns: block_hash, height, time, pools{sapling, orchard, ironwood}{final_r

Zcash network and node state: mempool size and bytes, node version, difficulty, network hashrate, chain progress and disk, block subsidy, and the funding streams (including Zcash Community Grants). When to use: macro questions about Zcash - how much hashrate secures it, whether our node is caught up, what the block subsidy and funding allocations currently are. Do not use: for shielded-pool suppli

Tron governance proposals: id, proposer, state, approvals, expiry and the parameters they would change. When to use: governance or staking questions, or checking whether a chain-parameter change is pending. Do not use: for the current parameter values (tron_get_chain_economics) or the witness list (tron_list_witnesses). Returns: total_proposals, by_state{}, top_by_approvals[] with proposal_id, pro

Ethereum transaction check by hash: success or reverted, gas used, fee paid, confirmations, whether the block is finalized, and any ERC-20 transfers decoded from the receipt logs (token, from, to, amount). When to use: did this ETH or ERC-20 payment actually settle, is it irreversible, who paid whom and how much. Do not use: for fee estimation (eth_get_fee_rates) or for Tron (tron_get_transaction)

Ethereum fee market from our own Reth node: current and next base fee, priority-fee percentiles over the last blocks, and the estimated ETH cost of a plain transfer and of an ERC-20 transfer. When to use: pricing an Ethereum transaction, or deciding what tip gets included quickly. Do not use: for Bitcoin (btc_get_fee_rates), Monero (xmr_get_fee_rates) or Tron (tron_get_chain_economics). Returns: b

Ethereum account state from our own node: ETH balance, nonce, and whether the address is a contract. When to use: balance and account type before sizing a transfer, or telling an EOA from a contract. Do not use: for ERC-20 token balances (eth_read_contract with balanceOf) or address risk scoring. Returns: address, balance_eth, nonce, is_contract, code_size_bytes.

Read-only (eth_call) against any Ethereum contract, executed by our own Reth node. ERC-20 helpers balanceOf / allowance / decimals / symbol / name / totalSupply are built in; any other function can be called by passing its 4-byte `selector` plus ABI-encoded `parameter`. Nothing is signed or written. When to use: an agent needs an on-chain value without trusting a third-party API - a USDT/USDC bala

Zcash transaction check by txid from our own Zebra node: confirmations, block height and time, whether it is in the active chain, size, and how much of it is transparent versus shielded. When to use: did this ZEC payment land, how deep is it, and does it involve shielded inputs/outputs. Do not use: to learn shielded amounts or parties - shielded values are hidden by the protocol and only a viewing

TRON node state from our own java-tron full node: tip height, finalized (solidity) height and how far solidity lags, peers, client version, transactions in the tip block. When to use: is the TRON node we operate synced and healthy, and how far behind is the finalized state. Do not use: for historical blocks or transactions - this is a lite full node and those APIs are closed. Returns: height, soli

One Tron block by height or block id, read from our own node: producer, timestamp, transaction count split by contract type, and the tx ids in it. When to use: inspect a specific block, or confirm which block a transaction landed in. Do not use: for the tip only (tron_get_current_block) or for a transaction itself (tron_get_transaction). Boundary: our Tron node is a lite full node that keeps only

One Tron transaction by txid: success or reverted, energy used, the call it made, and - this is the important part - any TRC-20 transfers decoded from the receipt logs (token, from, to, amount). When to use: did this USDT payment really land, for how much, from whom, and is it finalized. Do not use: for address risk scoring (tron_check_address_risk) or for blocks (tron_get_block). Boundary: our no

The current (tip) TRON block: number, id, parent, timestamp, transaction count and a breakdown by contract type, plus the producing witness. When to use: how busy TRON is right now, what is in the block being produced, who produced it. Do not use: to fetch an older block - a lite full node serves the tip only, historical blocks are closed. Returns: number, block_id, parent_hash, timestamp_ms, age_

TRON account state read straight off our own node: TRX balance, whether the account is activated, energy and bandwidth (used / limit), whether it is a witness, and account age. When to use: TRX balance and resource state before sizing a transfer, or checking whether an address exists on chain. Do not use: for USDT/TRC-20 token balances (use tron_read_contract with balanceOf) or for address risk sc

TRON contract metadata: name, creator, whether its ABI is published on chain, the function list, code hash and whether it looks like a TRC-20. When to use: before calling a contract, or to tell an unverified contract from a published one. Do not use: for risk/backdoor analysis (that is tron_check_address_risk and, on EVM, base_check_contract_risk). Returns: found, address, name, creator, has_abi,

Read-only (constant) call against any TRON contract, executed by our own node. TRC-20 helpers balanceOf / allowance / decimals / symbol / name / totalSupply are built in; any other function can be called with a raw selector plus ABI-encoded parameter. No state is changed and no key is involved. When to use: an agent needs an on-chain value without trusting a third-party API - USDT balance of an ad

TRON chain economics straight off our node: energy price (sun per energy unit), transaction fee, account creation fee, witness pay per block, total energy and bandwidth limits, maintenance interval and the next maintenance time, unfreeze delay. When to use: working out what a transaction will actually cost in TRX, or how TRON's resource market is currently priced. Do not use: for Bitcoin fees (btc

TRON super representatives and candidates: who is producing blocks, how many they produced, how many they missed, votes and websites - read from our own node. When to use: governance or staking questions about TRON, or checking the health of block production. Do not use: for account balances (tron_get_account). Returns: registered_witnesses, active_block_producers, top_by_blocks_produced[] with ad

Relay an already-signed raw transaction to the network through our own full node (non-custodial: we never see a private key). When to use: an agent signed a transaction locally and wants a high-availability broadcast path into the Bitcoin network. Do not use: to build or sign a transaction (we never hold keys), or to look up a payment (that is btc_get_transaction). Returns: {accepted, txid, chain,

Live availability of every service behind the RobotBase gateway: the chain nodes, Web3 Agent Hub, AITOKENS and MCP itself. When to use: an overall platform health check, or finding which service is down. Do not use: for a single chain's node state (chain_status) or its capability boundary (robotbase_capabilities). Returns: services[] {name, ok, detail} plus an overall ok flag.

TRON address risk intelligence: judicial and black-market labels, account profile and a 0-100 safety score. When to use: before accepting USDT from a counterparty - OTC settlement, merchant payout, or any agent that must not receive tainted funds; also to sanity-check an address you are about to pay. Do not use: to confirm that a specific transfer arrived (that is tron_verify_usdt_transfer). Retur

TRC-20 USDT settlement check by transaction id: did it land, is it irreversible, how much, from and to whom. When to use: an agent or a merchant must confirm a USDT payment before releasing value - this is the settlement check that closes an automated trade loop. Do not use: to assess the counterparty (that is tron_check_address_risk). Data source: our own java-tron full node when the transaction

Solana token rug-pull screen: mint and freeze authority, liquidity lock, holder concentration. When to use: before an agent buys or quotes a Solana token, or when a mint address shows up in a trade signal and you need the safety facts first. Do not use: for price or liquidity depth in USD (no DEX aggregator is queried here); for TRON addresses use tron_check_address_risk. Returns: risk_level (low|

Base (EVM) token and contract risk screen: honeypot, transfer taxes, verified source, backdoors and liquidity lock. When to use: before an agent trades, quotes or accepts a token on Base, or when an address shows up in an AgentKit / onchain-agent flow and you need the hard facts first - can it be sold, what does the exit cost, who can change the rules. Do not use: for Solana mints (that is sol_che