Rubin Exchange

Report what this session controls: the master account (its address in BOTH forms — cosmos rit1… and EVM 0x…, the same 20 bytes), the subaccount, whether it can trade or is read-only, and the exact on-chain authorization scope (which messages, which subaccount, and that it CANNOT withdraw/transfer). Also states what this session can NOT do: create wallets, reveal keys/mnemonics, or switch acc

Return the latest chain block height. Useful for SHORT_TERM order goodTilBlock math.

List all perpetual markets with ticker, status and oracle price. Use this first to discover valid market tickers (e.g. BTC-USD) before placing orders.

Get details for one perpetual market (clobPairId, atomicResolution, quantumConversionExponent, tick/step sizes, oracle price, status).

Get the live orderbook (bids/asks) for a market, optionally truncated to a depth.

Get OHLCV candles for a market at a given resolution. Useful for trend/volatility analysis.

Get recent OHLCV candles for a market across MULTIPLE resolutions in one call — by default ALL indexer resolutions (1MIN, 5MINS, 15MINS, 30MINS, 1HOUR, 4HOURS, 1DAY) — so the agent can read the trend across timeframes at once. Returns { candles: { <resolution>: [...] } }, newest first. Lower `limit` (e.g. 20) or pass a `resolutions` subset to keep the payload small.

Get the subaccount collateral (USDC asset position) and the on-chain wallet bank balances. Collateral is what backs trading; the WALLET balance is where money sent to the account lands and is NOT collateral until deposited. `funding` summarizes it: depositableUsdc (wallet minus the $0.95 gas reserve) and a suggestedAction — deposit_to_subaccount when the wallet holds spare USDC, top_up_gas when

Get the subaccount summary: equity, freeCollateral, marginEnabled, open perpetual positions and asset positions.

Get perpetual POSITIONS with size, side, entryPrice, unrealizedPnl, realizedPnl and netFunding. Defaults to OPEN positions. NOTE: a position is what you HOLD after an order fills — it is NOT an open order. When the user asks loosely "what is open?", check BOTH this and get_open_orders (or call get_portfolio for both at once).

Get currently active ORDERS for the subaccount, optionally filtered by market and side. Includes OPEN resting orders and UNTRIGGERED conditional orders (TP/SL accepted on-chain but not yet triggered). Returns { orders: [...] }. This does NOT include filled positions — a filled market/limit order leaves NO open order, it becomes a POSITION (see get_positions). When there are 0 orders but open pos

One-call snapshot of everything the account has "open": equity & freeCollateral, every open POSITION (with notional, unrealized PnL and estimated liquidation price), every active ORDER (resting + untriggered TP/SL), and account margin risk. Use this to answer "what do I have open?" or "how am I doing?" without worrying whether the user means orders or positions — it returns both.

Margin health for the subaccount: equity, freeCollateral, total maintenance/initial margin, maintenanceMarginBufferUsd (the EXACT liquidation guard — liquidatable when < 0), marginUsageRatio (1.0 = at liquidation), account leverage, and per-position estimated liquidation price + distance to it. Use before adding risk or to decide whether to protect/close a position.

Get executed fills for the subaccount, including price, size, fee and maker/taker liquidity.

Get historical PnL ticks for the subaccount (equity, totalPnl, netTransfers over time). Use createdOnOrAfter to bound the range.

Where the account's USDC sits: in the WALLET (bank balance — money sent to the account lands here and is NOT collateral) vs in the trading SUBACCOUNT (equity / free collateral). Returns depositableUsdc (wallet minus the $0.95 gas reserve), whether gas is low, and a suggestedAction (deposit_to_subaccount / top_up_gas / null). Call this when the user says they sent funds, when collateral reads 0,

Deposit USDC from the account's WALLET into its trading SUBACCOUNT so it becomes collateral. Without amountUsd it moves everything above the $0.95 gas reserve (what the web app does); with amountUsd it moves exactly that much, as long as $0.95 stays in the wallet. Funds never leave the account — this is an internal transfer the trading key is allowed to make. Use it when the user has sent money

Move a little USDC from the trading subaccount back to the WALLET when the wallet is at or below $0.55 — just enough to restore the $0.95 gas reserve that deposit/withdraw transactions need. Only the gas reserve, only to the account's own wallet; it cannot send funds anywhere else. Use after a transaction fails for lack of gas.

Place a limit order. Default timeInForce=GTT (long-term, durable, broadcast-commit so errors return synchronously). Use SHORT_TERM only for latency-sensitive orders (expire within ~20 blocks, broadcast async). NOTE: stateful (GTT) orders are rate-limited to 2/block and 20 per 100 blocks — pace placements. Returns `confirmation` with the REAL outcome verified via the indexer (filled / partially_f

Place an IOC market order. It executes as an IOC limit at a worst-acceptable price mirrored around the oracle by side — BUY caps ABOVE the oracle, SELL below — at slippageBps distance (default 500 = 5%). Fills happen at book prices; the cap only limits how deep the sweep goes. reduceOnly closes an existing position. Returns `confirmation` with the REAL outcome verified via the indexer (filled

Cancel a single order by clientId. For SHORT_TERM pass goodTilBlock; for LONG_TERM/CONDITIONAL pass goodTilTimeSeconds (the original good-til value, available from get_open_orders). Returns `confirmation` with the verified result (canceled / still_open / filled / pending): `code: 0` only means the cancel was broadcast. If `still_open`, the goodTil value likely did not match the original — retry.

Cancel every OPEN order for the subaccount in a market (handles SHORT_TERM and LONG_TERM automatically). Returns `confirmation.remainingOpen` — orders still OPEN after the cancel (0 = all gone); if > 0, retry.

Cancel multiple SHORT_TERM orders in one tx. SHORT_TERM only (chain limitation) — for stateful/mixed use cancel_all_orders.

Place a reduce-only Stop loss (conditional market order) that triggers at triggerPrice. Side must be the CLOSING side of the position: SELL closes a LONG, BUY closes a SHORT. Once triggered it executes as an IOC limit bounded at triggerPrice ± slippageBps in the direction of execution (BUY above the trigger, SELL below; default 500 bps) so the close can cross the book.

Place a reduce-only Take profit (conditional market order) that triggers at triggerPrice. Side must be the CLOSING side of the position: SELL closes a LONG, BUY closes a SHORT. Once triggered it executes as an IOC limit bounded at triggerPrice ± slippageBps in the direction of execution (BUY above the trigger, SELL below; default 500 bps) so the close can cross the book.

Close all or part of an open perpetual position with a reduce-only MARKET order. Reads the current position, flips the side automatically (LONG→SELL, SHORT→BUY) and sizes the close. percent defaults to 100 (full close); a partial close is floored to the market step size. The close is bounded at oracle ± slippageBps mirrored by side (closing a SHORT buys up to oracle×(1+slip), closing a LONG

Flatten EVERY open perpetual position with reduce-only MARKET orders (one per market). Respects the operator market allowlist (disallowed markets are skipped and reported). Each close is bounded at oracle ± slippageBps mirrored by side (default 500 bps = 5%). Returns a per-market result array — for any market reporting unfilled/partially_filled, re-run with a larger slippageBps.

Enter a NEW position with a MARKET order, sized by base `size` OR quote `notionalUsd` (exactly one required; notionalUsd converts at the oracle price and is floored to the step size). Optionally attach a reduce-only stopLossPrice and/or takeProfitPrice as conditional orders in the SAME call (the bracket, placed with the opposite/closing side and a 500 bps execution bound past the trigger). slippag

Fetch the latest headlines from the ritbit news feed (curated crypto / markets / business channels, newest first). Filter by `category` (crypto|markets|business) or explicit `channels`, and/or a free-text `query` (a ticker or keyword, matched in the post text and hashtags, e.g. BTC). Each item returns { source, url, publishedAt, tags (hashtags — where tickers appear), text }. There is NO importa

The trader PnL leaderboard for a time span (ONE_DAY, SEVEN_DAYS, THIRTY_DAYS, ONE_YEAR, ALL_TIME): rank, username, address, PnL (USD), ROI (%) and current equity per trader, paginated. Also returns `me` — this account's own row on that board, if it is ranked. Use `search` to find a trader by username or address. For this account's rank across ALL time spans at once, use get_my_rank.

Where THIS account ranks on the PnL leaderboard: rank, board size ("21 of 66"), PnL, ROI and equity — for one time span, or for every time span (ONE_DAY … ALL_TIME) when none is given. A null entry means the account is not ranked on that board (no qualifying activity in the window).

This account's current trading fee tier and conditions: maker/taker fee (% of notional; a negative maker fee is a rebate), the 30-day maker/taker volume it is judged on, any staking discount, the next tier and how much more 30d volume it takes, plus the full fee-tier table. Referred users start at the program's minimum fee tier (see get_referral_program).

This account's referral / affiliate program status: referral code and link, whether the link is unlocked (lifetime volume threshold, or already an affiliate), current affiliate tier and taker-fee share, referred volume (30d / all-time), earnings and referred-user stats, who referred this account, the full affiliate tier table and the program parameters (referee starting fee tier, 30d caps).